Fibocom

Fibocom Debuts U6G-Ready FG390 FWA Module at MWC Doha 2026

Image
Fibocom Debuts U6G-Ready FG390 FWA Module at MWC Doha 2026

DOHA – November 08, 2026 -- Fibocom is showcasing a U6G-enabled version of its FG390 5G module at MWC Doha 2026, targeting OEMs building fixed wireless access (FWA) devices as Upper 6 GHz networks go live in the UAE.

FG390 adds NR n104 and cross-band carrier aggregation for U6G rollouts

The U6G FG390 supports NR n104 and cross-band carrier aggregation with Sub-6 GHz. Fibocom positions it for next-generation CPEs, ODUs and enterprise gateways.

The launch follows two UAE milestones. e& UAE has launched a commercial U6G network, and du has announced end-to-end U6G connectivity using commercially available CPE equipment.

For existing Sub-6 GHz deployments, the FG370 and FG670 modules cover different FWA performance, hardware configuration and cost requirements.

Fibocom LTE Cat.1 bis Modules Hit 2.2 Mbps on SpaceX Direct to Cell

Image
Fibocom LTE Cat.1 bis Modules Hit 2.2 Mbps on SpaceX Direct to Cell

Auckland – November 08, 2026 -- Fibocom's LE270-EU and LE271-GL LTE Cat.1 bis modules reached approximately 2.2 Mbps and 2.0 Mbps downlink respectively on the SpaceX Direct to Cell (DTC) satellite network during live testing in New Zealand. Both modules ran standard firmware with no satellite-specific hardware modifications. They registered on the network, established IP data sessions and transmitted data over the satellite link.

Open-sky tests deliver 0.3 Mbps uplink and 80% to 90% ping response

In outdoor and in-vehicle tests with good sky visibility, both modules delivered around 0.3 Mbps uplink. Network registration took approximately 1 to 30 seconds, and ping response rates ranged from 80% to 90%. Both modules also registered and exchanged data under weak-signal conditions.

Fibocom Adds Upper 6 GHz to FG390 5G-Advanced FWA Module

Image
Fibocom Adds Upper 6 GHz to FG390 5G-Advanced FWA Module

Vienna – October 15, 2026 -- Fibocom has extended its flagship FG390 5G-Advanced fixed wireless access (FWA) module to the Upper 6 GHz spectrum, unveiling the update at Network X 2026.

FG390-MEA-30 adds NR n104 support on MediaTek T930 platform

The new FG390-MEA-30 variant runs on the MediaTek T930 platform. A new hardware design supports NR n104 and enables coordination between Upper 6 GHz and Sub-6 GHz. The FG390 is also shortlisted for the Network X Awards 2026 in the Best Indoor Connectivity Solution category, with its PC1 high-power capability cited as a key technical feature.

FG200 reaches engineering-sample stage alongside X85 and Wi-Fi 7 demo

Fibocom is demonstrating an X85-based 5G FWA solution paired with Wi-Fi 7. The FG200 is now ready for engineering samples, and the company describes the demo as part of its move toward 3GPP Release 18 and higher-performance broadband platforms.

Fibocom Adds Upper 6GHz to 5G-A FWA Module With 10Gbps Peak

Image
Fibocom Adds Upper 6GHz to 5G-A FWA Module With 10Gbps Peak

Vienna – October 14, 2026 -- Fibocom is showing a 5G-Advanced fixed wireless access (FWA) module that adds Upper 6GHz (U6G) support and delivers peak 5G downlink speeds of up to 10Gbps. The FG390-MEA-30 variant is on display at NetworkX 2026.

FG390-MEA-30 adds NR n104 and cross-band aggregation with Sub-6GHz

The module is built on MediaTek's 3GPP Release 18 T930 platform. It supports NR n104 and works alongside Sub-6GHz bands through carrier aggregation combinations including CA_n41A-n104A and CA_n78A-n104A. Fibocom says pairing U6G bandwidth with established Sub-6GHz coverage raises throughput while keeping connectivity reliable.

The module targets customer premises equipment (CPE), outdoor units (ODUs) and enterprise gateways. Fibocom says it simplifies product development, streamlines certification and shortens time to market.

Fibocom, Grid-OS Expand India IoT Push with Payment, Tracking Modules

Image
Fibocom, Grid-OS Expand India IoT Push with Payment, Tracking Modules

New Delhi – October 08, 2026 -- Fibocom and India-based IoT ODM Grid-OS are expanding their partnership to cover smart payment and vehicle tracking devices, unveiling new products at IMC 2026 as India's digital payments volume hits 24.51 billion UPI transactions in August 2026 alone, according to NPCI data.

Grid-OS showcases payment soundbox built on Fibocom's LE270 module

The Payment Soundbox uses Fibocom's LE270 LTE Cat 1 bis module to deliver stable 4G connectivity for real-time transaction alerts. The module's low-power design, optimized for connected-mode and DRX standby consumption, enables roughly 7-8 days of battery life on a 2000mAh battery.

Fibocom Launches MGB GNSS Series for India's IoT Market

Image
Fibocom Launches MGB GNSS Series for India's IoT Market

New Delhi – October 07, 2026 -- Fibocom unveiled its MGB Series GNSS portfolio at India Mobile Congress 2026, introducing three modules that range from cost-efficient single-frequency tracking to RTK-enabled positioning accurate to 1 cm + 1 ppm.

Three modules target different cost and accuracy tiers

The MGB180 and MGB280 handle mainstream single-frequency GNSS needs, supporting GPS, BDS, GLONASS, Galileo and QZSS with 96 tracking channels and integrated AGNSS. MGB180 is built for highly cost-sensitive tracking devices with compact, low-power design, while MGB280 adds faster startup, reacquisition and cellular coexistence for asset tracking, fleet management and vehicle telematics.

Fibocom Launches RU311 5G RedCap Module for Mid-Tier IoT Upgrades

Image
Fibocom Launches RU311 5G RedCap Module for Mid-Tier IoT Upgrades

Shenzhen – September 08, 2026 -- Fibocom Wireless Inc. has launched the RU311 5G RedCap module series, targeting mid-tier IoT devices such as industrial gateways, security cameras, aftermarket automotive systems, energy applications and MiFi devices that require a lower-cost path from 4G to 5G.

RU311 delivers dual-mode 5G RedCap and LTE Cat.4 connectivity

Built on the UNISOC V527 platform, the RU311 supports 5G RedCap with peak downlink speeds up to 226 Mbps and uplink speeds up to 120 Mbps. In LTE Cat.4 mode, it reaches 150 Mbps downlink and 50 Mbps uplink, giving manufacturers a single module capable of serving both legacy and next-generation deployments.