Manufacturing & Industrial Technology

Qingdao Expo Draws 300+ Firms From 12 Nations for AI Consumer Tech

Image
Qingdao Expo Draws 300+ Firms From 12 Nations for AI Consumer Tech

Qingdao – September 09, 2026 -- The 2026 China International Consumer Electronics Exposition opened at the Qingdao International Convention Center, drawing more than 300 domestic and international enterprises from 12 countries and regions across a 60,000-square-meter exhibition floor.

Shandong's Only National-Level Expo Marks 22nd Edition

The event is hosted by the People's Government of Shandong Province and jointly organized by the China Chamber of Commerce for Import and Export of Machinery and Electronic Products, the Chinese Institute of Electronics, and the Qingdao Municipal People's Government. It stands as the only national-level professional exhibition in Shandong Province and has now run for 22 consecutive editions.

DBU-Backed EcoCoat Project Cuts Powder Coating CO2 Footprint by 70%

Image
DBU-Backed EcoCoat Project Cuts Powder Coating CO2 Footprint by 70%

Osnabrück – September 09, 2026 -- The Deutsche Bundesstiftung Umwelt (DBU) has funded a €370,000 project that achieved the first successful shift to bio-based powder coating formulations, cutting the carbon footprint of the coatings by more than 70 percent.

Consortium proves fossil-free powder coatings are technically feasible

The "EcoCoat" project, backed by DBU with roughly €370,000, brought together iLF Magdeburg GmbH, powder coating manufacturer Ganzlin Beschichtungspulver GmbH -- a company with about 70 employees -- and the Core Facility Microscopy and Materials Analysis (CMMA) at Otto-von-Guericke University Magdeburg. Dr. Susanne Bender, managing director of iLF Magdeburg, said the results demonstrate that powder coatings can largely be produced without fossil raw materials.

German Factory Orders Jump 2.5% in July on Aircraft, Ship Deals

Image
German Factory Orders Jump 2.5% in July on Aircraft, Ship Deals

Wiesbaden – – September 09, 2026 -- New orders for Germany's manufacturing sector rose 2.5% month-on-month in July 2026 on a seasonally and calendar-adjusted basis, according to preliminary data from the Federal Statistical Office (Destatis), driven almost entirely by a surge in large-scale aircraft, ship and rail contracts.

Stripped of big-ticket orders, however, the underlying order book contracted 1.4% versus June, exposing weaker core demand beneath the headline figure. Orders climbed 13.1% year-on-year on a calendar-adjusted basis. June's initially reported 3.1% monthly gain was revised upward to 3.7%, with annual growth of 7.2%.

NOVOSENSE H1 Revenue Jumps 66.7% on AI Server Power Chip Demand

Shanghai – September 09, 2026 -- NOVOSENSE (HKEX: 02676) reported first-half 2026 revenue of approximately $374.54 million, up 66.73 percent year-on-year, with net profit attributable to shareholders reaching $9.97 million. The analog and mixed-signal IC maker has posted sequential quarterly revenue growth for several consecutive quarters.

Automotive electronics revenue climbs 60% as cumulative shipments surpass 1.95 billion units

Automotive electronics revenue rose about 60 percent, accounting for 32.38 percent of total first-half revenue. NOVOSENSE shipped 534 million automotive chips during the period, pushing cumulative shipments past 1.95 billion units.

HSG Laser Helps Draft First ISO Safety Standard for Handheld Lasers

Foshan, China – September 09, 2026 -- ISO 11553-2:2026, the world's first international safety standard for handheld laser processing machinery, was officially published on September 09, 2026, following a seven-year development process led under China's technical direction. HSG Laser served as a core member of the Chinese expert group that initiated and drafted the standard.

New ISO standard shifts safety focus to product design, not user protocols

ISO 11553-2:2026 covers safety requirements for hand-held or hand-operated laser processing machines and marks the first ISO/IEC international safety standard for complete laser processing systems. The standard moves safety management away from personnel training and end-user protection toward mandating inherent safety design in the equipment itself, setting a unified global benchmark for the fast-growing handheld laser welding and cleaning equipment market.

Chip Equipment Billings Hit Record $40.53B on AI Demand Surge

Image
Chip Equipment Billings Hit Record $40.53B on AI Demand Surge

Milpitas, Calif. – September 09, 2026 -- Global semiconductor equipment billings climbed 23% year-over-year to $40.53 billion in the second quarter of 2026, marking a second consecutive record quarter, according to SEMI's Worldwide Semiconductor Equipment Market Statistics (WWSEMS) report.

Quarterly billings grew 11% sequentially as AI infrastructure spending accelerated
The second-quarter figure represents an 11% quarter-over-quarter increase, building on the prior record set in the first quarter of 2026. SEMI attributed the sustained growth to rising demand for advanced manufacturing capacity tied to AI computing infrastructure buildouts.

HiKOKI Launches Cordless Nailers Matching Pneumatic Power for Europe

Image
HiKOKI Launches Cordless Nailers Matching Pneumatic Power for Europe

Stuttgart – September 09, 2026 -- HiKOKI, part of KOKI Group, unveiled a new generation of cordless nailers for Europe that eliminate gas cartridges, hoses and compressors while matching pneumatic-tool firing speed and driving force. The three-model lineup will reach independent tool distributors from November 2026, with pricing and configurations varying by country.

New drive system delivers pneumatic-level force without external air lines

The platform runs on HiKOKI's Air Spring Drive System Plus, which stores and releases compressed air inside the tool itself. Combined with brushless motors and MultiVolt battery technology, the system enables trigger response times of 43 milliseconds -- the fastest among non-pneumatic nailers and roughly half that of the nearest cordless competitor.

Frore, Lenovo Unveil AeroBlade Notebook With AirJet Solid-State Cooling

Berlin – September 09, 2026 -- Frore Systems and Lenovo unveiled the AeroBlade concept notebook, an ultra-slim, silent laptop powered by the Lenovo Active Flow thermal solution built on Frore's AirJet solid-state cooling technology, at the Lenovo Innovation World '26 event in Berlin, Germany.

AirJet Mini delivers 50% more heat dissipation than its predecessor

The updated AirJet Mini chip dissipates 7.5 watts of heat, a 50% increase over the first-generation AirJet Mini, while measuring just 27mm x 41.5mm x 2.65mm to fit ultra-compact form factors. The solid-state device generates back pressure of 2,000 Pa, roughly 10 times higher than a mechanical fan, enabling dustproof and water-resistant enclosures. Noise output is rated at 21 dBA in-system, allowing silent operation with no moving mechanical parts.

Military Robots Market to Triple to $128.92B by 2031

Image
Military Robots Market to Triple to $128.92B by 2031

Delray Beach, Fla. – September 08, 2026 -- The global military robots market is projected to grow from USD 42.15 billion in 2026 to USD 128.92 billion by 2031, a 25.1% compound annual growth rate, according to MarketsandMarkets. Unit volumes are forecast to climb from 74,817 in 2026 to 109,010 by 2031 as armed forces expand deployment of unmanned ground, air and maritime systems.

Marine systems post the steepest growth rate through 2031

The marine segment is set to register the highest CAGR at 26.7% between 2026 and 2031, driven by naval demand for unmanned surface and underwater vehicles used in mine detection and underwater threat identification. The Royal Navy is introducing autonomous vessels for mine hunting, while the US Navy is expanding unmanned maritime systems for mine countermeasures to reduce personnel exposure in high-risk waters.

BARTEC Launches Modular Ex de Panel, Cuts Costs Fivefold

Image
BARTEC Launches Modular Ex de Panel, Cuts Costs Fivefold

Bad Mergentheim, Germany – September 08, 2026 -- BARTEC has launched its Ex de Modular Energy Distribution Panel Series, a hazardous-area power distribution platform that delivers up to five times greater cost efficiency than conventional Ex d solutions while cutting engineering and installation effort.

Platform earns dual certification for Zone 1/21 and Zone 2/22 hazardous areas

Certified according to ATEX and IECEx requirements, the configurable panel series supports applications up to 690 V and 1,000 A. Enclosures are available in corrosion-resistant GRP or stainless steel, rated for ambient temperatures from -20°C to +55°C, extendable to -40°C with an optional heater.